07-Aug-10

Hello my name is Joey, (Joseph Femia) I think it's time to sell my unfinished project... an 1976 DUCATI 500 GTL Parallel Twin, (not the DESMO series)...

It's all apart, all original components, sandblasted, some spares & a few after market pieces as well, it's all there & more, but I've got no time to complete this task...

I met some time ago a then member of your Club, Tim Santa Maria at the Restaurant l work at, Kazbah in Balmain & he mentioned your Club as possible option in the future if l were to choose to sell my sweet handling, dear little rare Machine...

I figured approx $700.00 seems a reasonable price unless your guidance thinks otherwise...

Looking forward to a further collaboration good folks, Joey... Thank You!

My contact info is 0417 499941 or 02 9411 1964...

____________________________________________________________________________________________________________

18-Mar-10

1970 Ducati 350 Mark 3 Desmo for sale.
Near new Avon Road Riders on Akront wheels.
Set up for solo riding with clip ons and rear set pegs. Handle bars, triple tree to convert to upright riding position included in sale, also Ducati pillion pegs.
Aprilia switch gear - original key - whitefaced Veglia tacho.
Open Queensland registration September 2010 - DUC 70 -
Strong compression - starts, runs and idles well.
Suit collector - very good restored condition - $19,800

Phone: 044722 5017 - 07 5482 5017

____________________________________________________________________________________________________________

08-Mar-10

Triumph Sprint 900
1996 Model
61k
12 months reg (05/03/10)
Hard panniers
Spares: motor and electronic ignition, original pipes, factory manual $6,885, willing to haggle

Chris.
0297361159
chrisgillett@primus.com.au

____________________________________________________________________________________________________________

06-Feb-10

Ducati 999S For Sale -

You will not get better.
Sold as a Full Spec. Race Bike, Track Day Bike or Road Bike - you choose.
All Road Fairings, Lights and gear can be included.
Huge list of parts available with this bike.

Contact - Email: info@sportsbike.com.au or Call: 02 9310 0732 to find out more.

____________________________________________________________________________________________________________

06-Feb-10

Pantah 600 1983 72,000km

Completely stripped just a few months ago.
Frame, rear guard, chain guard, triple clamps, headlight bracket, etc has been repainted. Wheels repainted.
Dash repainted and rewired. Seat recovered. Cases highly polished. All new fasteners used in reassembly. New tacho.
Everything checked out, new fork seals and oil, head set bearings replaced, valve clearances done.
Front tyre almost new, rear about 50%. Brake pads about 75%.
The bike has not been riden much, only about 10,000km in last 10 years.
Body work was repainted a few years ago. Still looks very very nice, been garaged all that time.
About 10,000km ago received top end service, ie valve regrind. And new pistons and rings.
Also around 10,000km ago new timing belts.
This bike is super clean as it has not been ridden much (yes around the local suburb a few times) since reassembly.
Very original.
Has 2 in 1 Gianelli pipe and sounds awesome, very crisp note.
In great mechanical and electrical condition, everything works, oil, filter, spark plugs etc. all just changed. Starts first go every time.
The muffler bandage around the pipe is because I kept touching the pipe with my shoe, not only did it melt my shoe but it soiled the pipe. Pretty easy to remove just held on with hose clamps.
Also - I have a single seat cowl for it too.
In Sydney.

$10500 - ono

Contact - jkosnar@gmail.com
Email me for more pictures

____________________________________________________________________________________________________________

09-Sep-09

ST4’s for sale
Adjustable Ohlin Suspension, Carbon fibre rear guard. Matching panniers, Ducati power accessory adapter, New Battery, Front tyre approx 70%, New Rear, Radiator, Oil cooler and Head light protector, Excellent condition. WA registered to August 2010.
12,600k’s $14,500 ONO

Contact Steve
Phone : 0401 695 566
Email : scrispinbrown@metric.com.au

____________________________________________________________________________________________________________

09-Sep-09

Annual pass to all National Parks in USA
Pass expires June 30th 2010. Great for anyone traveling to the USA and needs entry to parks such as Yosemite, Sequoia, Grand Canyon and Yellowstone as well as many other parks both sides of the USA. Most entry fees are from $20 to $30. This pass cost $80 will sell for $40 or nearest offer.

Chris Nankivell
Ph 43 591 858

Mob 0401 895 102

____________________________________________________________________________________________________________

01-June-09

2004 Ducati 749r.

Full Carbon Fairing. Ohlins Forks, Shock and Steering Damper. Gillies Rear Sets and Chain Adjuster. Power Commander and Dynojet Quick Shifter. Marchesini Forged Alloy Rims. Carbon Front and Rear Hugger. 520 Chain and Sproket Conversion. Sargent Seat. Ducati Performance Fuel Cap. 19l Fuel Tank vs. all other 749's and 999's which are 15l. Puig Tinted High Screen. Full Termi 57mm Exhaust System. STM Slipper Clutch, All Keys (2 x black and 1 x red) and paperwork. Near new tyres. Original exhaust, rear sets and chain adjusters. Detailed service history. 11,800 k's. Registered until December.

Price: $23,500

Contact Darren Jones
0410648158
darrenjonesis@mac.com

23-Mar-10

Decal set for 1982 900SS.

Recently purchased from MotoGraphix however no longer required.

Cost $350, will sell for $220.

Call Andrew 0411 138 540

____________________________________________________________________________________________________________

19-Mar-10

For sale
Assorted Bike stands

Pitman Rear stand- complete
1x Pitman for rear swing arm, has flat plates for swing arm, adjustable from 320-410 mm (has wheels)
New Price $180-00  - Asking $80-00

Anderson Rear stands with wheels - complete
2 x Anderson Light weight for rear swing arm, have forks, (need spools for swing arm), adjustable from 320-410 mm (have wheels) New Price $180-00 - Asking $60-00  

Anderson rear space saver with wheels- incomplete
2 x Anderson Space saver, for rear swing arm, no end pieces (can be bought from Adersons for about $35-00) , width between frame is  390 mm (have 3 x wheels so the bike can be moved around) New Price $220-00 - Asking $90-00 ea

Anderson Rear Basic, no wheels- incomplete
2 x Anderson Basic, for rear swing arm, no end pieces (can be bought from Adersons for about $35-00), width between frame is 340 mm (No wheels) (similar the  Anderson Basic but no wheels) New Price $100-00  -Asking $30 ea

Anderson Heavy duty, with wheels - incomplete
1 x Anderson rear Heavy Duty, for rear swing arm, no end pieces (can be bought from Adersons for about $35-00), width between frame is 350 mm (With Wheels) New Price $180-00  -Asking $60-00

Anderson Rear Basic, small wheels- incomplete
1 x Anderson Light Weight for rear swing arm, no end pieces (can be bought from Adersons for about $35-00) , width between frame is  340 mm (With small wheels) New Price $100-00- Asking $35-00

 

Anderson Single sided with wheels- complete
1 x Anderson Single sided, for rear swing arm  (With wheels) 1 x pin only suits Ducati New Price $245-00 – Asking $100-00

Anderson Ducati stands
4 x Anderson Ducati under engine lifter frames New Price $135-00 – Asking $50-00

These stands are all second hand and are in reasonable condition
Pick up only (Marsfield) N.S.W or DOCNSW club meeting
Chris Maloney
0414 018 586
02 9869 4406
caloney@iinet.net.au

____________________________________________________________________________________________________________

19-Mar-10

* Chrome clutch cover (as new no marks) $50ono
* Mirrors to suit a Sport 1000 or project bike (as new no marks) $120 each ono
* Clip On's (as new no marks) off a Sport 1000 $100ono
* DBT leather Jacket. Would suit a small lady. As new $120ono
* DBT leather Pants. Would suit a small gal or guy. As new $120ono
* Ventura rack only $60ono
* Aviation Googles with interchangeable lenses new $120ono * Open Face Leather Helmet near new (current model) - woren only a couple of times but found it too small for me $90ono
* Helmet full face black near new - woren only a couple of times but found it too small for me $120ono
Phone Antonio 0409248295
____________________________________________________________________________________________________________

04-Mar-10

I removed these exhaust pipes when I bought the bike originally (Monster 620 ie), and they've been sitting in my garage ever since.
They are the Remus manufactured cans for Ducati, and are in mint condition.
If you are looking to replace some scratched or damaged cans you may already have, these are as close to new as you will get.

$1000

Contact : Brad 0400607213
____________________________________________________________________________________________________________

27-Jan-10

FREE

Oil filter for a 600 super sport 95 model, genuine part no. 44440034A Pick up from St Peters.

Contact Greg 0434 284 534

____________________________________________________________________________________________________________

05-Aug-09

ST2/4 Genuine Ducati Spares - Condition: New

3 rear blinkers in box - $55 each

1 pr rear brake pads in original sealed pack - $30

Spyball motorcycle alarm system - $50

Items can be posted or picked up from Canterbury, Sydney

Norm White
Mob: 0425 262 949

____________________________________________________________________________________________________________

27-May-10

1999 Ducati ST2 parts for sale
All parts are in good working order and have been removed due to upgrades-

1) Stock pipes $300

2) Handle bars $100 ea

4) Lights Stock $250

5) Spring stock $40

6) Rear brake disc (on to just under recommended thickness) $50

7) Screen stock $100

8) Clutch cover stock $40.

Phil Hefner
Ph: 0420 931611 philhefner@yahoo.com.au

Recently opened in the Ryde/Meadowbank area is a specialist Ducati workshop called Desmo Clinic.

Owned and operated by a husband and wife team striving to provide a real alternative to existing Ducati service providers. Some of you may already know Michael Berry from Scot Walkers, Gowanlochs or Flywheels where he learnt his craft under the watchful tutilidge of some of the industry leaders and went on to achieve several awards in recognition of his efforts. Michael’s wife Dallas comes from a Legal background and looks after the Admin side of the business. Together they welcome DOCNSW members and can assure them of a high quality service at a reasonable price.

They can be contacted via www.desmoclinic.com.au

 

Hi All
We have organised a BST Birthday sale to celebrate our appointment as BST Distributor for Australia, 15% off the RRP until August 15. This is a one off deal, and a 25% deposit is required. Once all orders are in we will place an order on BST and the wheels they don't have in stock will go into production (6-8 weeks), balance will be payable when stock lands in Australia prior to delivery to you..
The list attached is for Street Wheels - Single Sided Swingarms listed as Offset, Double sided as Conventional. The Wheels are priced as a set and conventional sets come with the sprocket carrier (see info below) so all you need is a sprocket.. we will be looking at carrying these soon as well..
Any questions please ask, PM me for order details. Please feel free to offer this to friends and associates, and dealers are also welcome as we will have dealers in place also. BST Conventional Rear wheels are supplied with the BST Sprocket Carrier.
You will need a sprocket to fit this Carrier: Details: PCD of 5 hole = 100 mm ID = 76 mm Fitment listing (pricing does not include Harley Davidson/ or Motard wheels)
[url=http://www.blackstonetek.com/pages/application.htm]http://www.blackstonetek.com/pages/application.htm[/url] [img width=603 height=600]http://i720.photobucket.com/albums/ww206/Michael2511/BSTBirthdaySale.jpg[/img]

Regards

Michael Anderson
Carbon Imports & Accessories
PO Box 1674 Potts Point
Sydney, NSW Australia 1335
Mobile: +61 (0) 409 700 101

www.carbon-imports.com.au

____________________________________________________________________________________________________________

Updated 8/8/2010

I have 2 sets of Oz Forged Alloy wheels to clear out - as listed below
These wheels arrived with a few slight blemishes/marks from anodizing.. 2 sets only have a slight blemish on the rear wheels (hardly noticeable)

1 x set of Black Oz Forged Alloy Wheels 3.5"x17.0 Front (perfect) + 5.5""x17.0 Rear (slight blemishes) normally $2599 - less 15% $2209.15 The above rims will fit the following bikes: Monster S4R/S4RS 2006-2008 / 848 / Hypermotard

1 x set of Gold Oz Forged Alloy Wheels slight blemishes front & rear rims 3.5"x17.0 Front + 6.0"x17.0 Rear normally $2599 less 20% $2079.20 inc GST The above rims will fit the following bikes: Ducati 1098/1198 / Streetfighter / Multistrada 1200

[IMG]http://i720.photobucket.com/albums/ww206/Michael2511/PROD_piega_black_R.jpg[/img]
[IMG]http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_BLACK2.jpg[/img]
[IMG]http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_GOLD2.jpg[/img]
[IMG]http://i720.photobucket.com/albums/ww206/Michael2511/RearSSW.jpg[/img]

Regards

Michael Anderson
Carbon Imports & Accessories
PO Box 1674 Potts Point
Sydney, NSW Australia 1335
Mobile: +61 (0) 409 700 101

www.carbon-imports.com.au

____________________________________________________________________________________________________________